1. Slow drying of wood：
Want drying wood first before making furniture, as a result of high-grade wood oily big, hardness is tall, in drying process, want by low to rise slowly to rise high, after waiting for temperature to achieve a requirement, drop in temperature slowly again, this process wants a month to arrive two months commonly, some wood is planted even a few longer.

2. Cutting：
Logs are sawn into boards or squares for making various implements. Open material is the door pay attention to kung fu, especially high-grade wood, under the premise of avoiding natural defects of wood, try to long material, according to the wood texture to open one or two string section.

3. Curved edge members are machined by sou saws：
Sou saws are specially used to cut curved parts of the tool, the use of flexible, sawing part usually by the technician to process. Now there is machine operation as well as manual operation.

4. Assemble：
Assemble the machined parts. Batch production of components, in the assembly of loose, tight or loose gap, need to repair the mortise or tenon at any time.

5. Manual hit：
Traditional furniture use adhesive is mainly fish swim bladder or pig skin fat (processing the dried fish swim bladder with warm water to soft, and then repeatedly tamped to wooden mortar can be pulled into strips), the children glue furniture, durable, once needed to repair, just use warm water to soak, you can open the children glue.

6. Sculpture：
Sculpture is decorative patterns on furniture, according to the decorative requirements of carving, carving, high relief, low relief, flat carving, wool carving, round carving and so on. There are two sides and one side of carving. Flat carving and Yin carving and Yang carving.

7. Rinse：
After the pattern carving, the ground should be treated very flat, otherwise it will affect the overall effect of the pattern.

8. Polish：
After the completion of the cleaning, enter the grinder workshop to start grinding, the traditional way is to use file grass grinding, now use sandpaper, generally grinding four times, from coarse to fine grinding again. Grinding process is very important and directly affects product quality. If the grinder is not law, the work will be worn out; On the contrary, the grinder can make up for the lack of carver back.

9. Wax：
Make up by the wax of a variety of different breed, heat into liquid, brush with wool on furniture.

10. Roast wax：
After hitting wax, to make furniture absorbs wax fluid adequately, want to bake repeatedly with hot fan, name says to bake wax.

11. Paraffin cutting：
After the wax is baked, it should be put for a day and a night, so that the wax is fully solidified, and then the surface wax is scraped. Float after wax is scraped, wipe repeatedly with coarse cloth, muslin, call polishing.